|
Post by chainsawfever on Mar 12, 2021 18:24:34 GMT -5
Hey guys I have a newly acquired 150 auto blue and white. It seems to have a crank seal leaking on the starter side. I didn’t notice it until after I cut with for a while. When I tip it so the starter side is up it will idle down and die sometimes. It’s full of fuel when doing this. What are you guys using for an alternative to the original crank seals for these guys? From the looking I have done the original seal is not available. Anyone have an aftermarket seal?
|
|
|
Post by Clasec on Mar 12, 2021 19:47:02 GMT -5
I believe it crosses to CR4913 if the part number is 94638.
|
|
|
Post by chainsawfever on Mar 12, 2021 20:14:18 GMT -5
Ok great, thank you. That gives me something to work with. I have two other 150s and they are great little saws.
|
|
|
Post by undee70ss on Mar 12, 2021 20:45:21 GMT -5
|
|
|
Post by chainsawfever on Mar 12, 2021 22:02:32 GMT -5
Wow that’s awesome thanks!
|
|
|
Post by chainsawlady on Mar 13, 2021 16:57:29 GMT -5
I have several seals for the 150 The last number used for these seals is 09108. `94638 then 07025 and last 09108. I have 7 left. chainsawlady on House of Homelite.
|
|
|
Post by chainsawfever on Mar 14, 2021 4:26:24 GMT -5
I have several seals for the 150 The last number used for these seals is 09108. `94638 then 07025 and last 09108. I have 7 left. chainsawlady on House of Homelite. Chainsawlady, I wish I would have seen your post first as I just ordered some seals for it. If I need anymore I will shoot you a message. I just got another 150 for parts that I might try to get running so it could need seals also. Thank you!
|
|