|
Post by andersow on Jan 12, 2021 15:01:19 GMT -5
Where can I find a rebuild kit?
|
|
|
Post by edju1958 on Jan 12, 2021 17:51:08 GMT -5
You can try a local small engine shop.I can't remember where I bought mine,either eBay or Amazon.
|
|
|
Post by andersow on Jan 13, 2021 12:19:09 GMT -5
I tried that. They had a book for the C1 and C3 but nothing for a C2. Was the C2 a one and done? Can I switch it out for something else on my Super 2?
|
|
|
Post by edju1958 on Jan 13, 2021 17:28:16 GMT -5
|
|
|
Post by andersow on Jan 15, 2021 13:31:55 GMT -5
That looks like the right fit. Thanks so much. One question what are the small round metal pieces in the rebuild kit? What do they do, do they need to be replaced, if so how do you get them out? Thanks for your help!
|
|
|
Post by xl130 on Jan 15, 2021 15:02:11 GMT -5
That looks like the right fit. Thanks so much. One question what are the small round metal pieces in the rebuild kit? What do they do, do they need to be replaced, if so how do you get them out? Thanks for your help! Those round metal pieces are “Welch” plugs. 99.9% of the time you don’t need to worry about them. I’m not familiar with your carburetor at all to be honest but Welch plug removal and install are all done the same regardless of the model as far as I know. Here is a couple of good videos for you to watch if you really want to be thorough with your rebuild. This carburetor is a Tillotson HS and some of the steps would likely not apply to your carburetor. Like I said though, it it’s very rarely necessary to remove the soft plugs. youtu.be/nxozF7AgO34youtu.be/S53xKLrtfswyoutu.be/YI3-tpwPHo4
|
|