Post by mcclain189 on Oct 3, 2020 12:50:28 GMT -5
Good morning to all, Could I get some help on how to read the numbers on these Oregon bars, and how to figure out the drive link count?
This is where I'm at; The chain gauge must match the bar gauge, the chain pitch must match the pitch on the drive sprocket....So,,, the white bar is 27" and .050 gauge and the other bars are 32"/36" .063 gauge, That I get, I'm lost on the relationship of the top 2 lines and the 2nd 1/2 of the bottom line (I assume) part # and mount code. I've read thru several posts and downloaded most of the literature shared here and struggling to figure this out.
The 32" and 36" bars have 9.5mm bar stud openings and 8mm tensioner openings, which roughly looks like the Oregon D009 mount?
Oregon 2750 2033SE by Kevin McClain, on Flickr
Oregon 3263 3154TK by Kevin McClain, on Flickr
Oregon 3663 2559SV by Kevin McClain, on Flickr
This is where I'm at; The chain gauge must match the bar gauge, the chain pitch must match the pitch on the drive sprocket....So,,, the white bar is 27" and .050 gauge and the other bars are 32"/36" .063 gauge, That I get, I'm lost on the relationship of the top 2 lines and the 2nd 1/2 of the bottom line (I assume) part # and mount code. I've read thru several posts and downloaded most of the literature shared here and struggling to figure this out.
The 32" and 36" bars have 9.5mm bar stud openings and 8mm tensioner openings, which roughly looks like the Oregon D009 mount?
Oregon 2750 2033SE by Kevin McClain, on FlickrOregon 3263 3154TK by Kevin McClain, on FlickrOregon 3663 2559SV by Kevin McClain, on Flickr