|
Post by ronaldt on Jan 12, 2019 7:32:52 GMT -5
Does anyone have a good source for the chrome plug that goes in the side of the carb cover on some of the old Homelites? Some of the saws needing this would be Zip, EZ, EZ-6, 7-19,etc. The chrome plug fills a 3/4 inch hole in the recoil side of the carb cover. The hole is to access the high and low carb adjustments. I assume these plugs usually were not put back in to ease carb adjustment. I have tied several hardware stores and Home Depot etc with no luck. I found some on line but it's hard to tell if they are correct.
|
|
|
Post by stillsawing on Jan 12, 2019 11:02:38 GMT -5
We have a local True Value that carries a selection of this type of plug. I found the proper size for my Zip B.
|
|
|
Post by ronaldt on Jan 14, 2019 6:59:59 GMT -5
I found some at a Runnings store. They are nickel plated instead of chrome but look fine.
|
|