|
Post by sawnami on Aug 29, 2018 5:52:48 GMT -5
I put a new belt on a 5-30N last night. This is a Bridgeport milling machine belt with the same pitch and tooth count as the original belt.
|
|
|
5-30N Belt
Oct 21, 2018 15:57:49 GMT -5
via mobile
Post by xzavious66 on Oct 21, 2018 15:57:49 GMT -5
Will that belt work on as 26LCS?
|
|
|
Post by sweepleader on Oct 21, 2018 17:38:26 GMT -5
Nice work, love those belt drives.
What are the specs on that belt? Looks like Bridgeport part number 11182106, is that correct? I don't need one but maybe others would like to know.
|
|
|
Post by sawnami on Oct 21, 2018 22:21:16 GMT -5
Will that belt work on as 26LCS? The Bridgeport belt is 1-1/8" wide. You will have to cut the belt down to a width of 23/32" Nice work, love those belt drives. What are the specs on that belt? Looks like Bridgeport part number 11182106, is that correct? I don't need one but maybe others would like to know. The Bridgeport belt is 1-1/8" wide, 42 teeth, .5437 pitch, 22-15/16" long. That is one of the Bridgeport part numbers.
|
|