chainsawer
Groundie
Homelite 150 oiling to much
Posts: 9 
|
Post by chainsawer on Jan 10, 2018 16:50:18 GMT -5
There is a little play in cran.kshaft bearing on the flywheel side, replaced it with a new bearing still has about the same amount of play, is it normal to have radial movement? The crankshaft does not appear worn.
|
|
|
|
Post by sweepleader on Jan 10, 2018 17:35:09 GMT -5
A small amount of axial movement would be normal, the factory might have published specs, I don't know about that. There should be NO radial movement.
|
|
chainsawer
Groundie
Homelite 150 oiling to much
Posts: 9
|
Post by chainsawer on Jan 10, 2018 20:12:00 GMT -5
Thanks axial movement is what the saw has...will proceed with rebuild.
|
|
