Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 8, 2018 18:01:28 GMT -5
The stock line cals for a 6-1/4" line that would put my filter almost 1-1/2" off the bottom, the line I have on there now is about 7-3/4" and 3/16" ID by 5/16" OD and it doesn't look that long. The fitting on the inside of the tank outlet is a 3/16" ID tygon hose fit right over, but the fitting from the tank and on the carb is much larger, about 5/16" ID. The line from the tank fitting to the carb wasn't tight at all and I am a little concerned about that, but I really dont think the 3/16" Tygon will go over my fittings from the tank to the car especially with the ridges in the fittings. 20180108_163653 by Al Michaels, on Flickr
|
|