|
|
Post by jeffsasin on Aug 12, 2015 9:01:47 GMT -5
looking for a top end rebuild kit for this saw. head gasket rings and piston possibly. any help would be great
|
|
|
|
Post by onlyhomelites on Aug 12, 2015 21:54:40 GMT -5
|
|
|
|
Post by jeffsasin on Sept 17, 2015 9:34:17 GMT -5
Yes this helps a lot. Thanks
|
|
|
|
Post by jeffsasin on Apr 17, 2016 9:13:14 GMT -5
I put a complete carb rebuild kit on this saw. Including a new needle. I have fuel pouring out of carb when the saw sits overnight. Could there be an imperfection somewhere in the carb.
|
|
|
|
Post by 2stroked on Apr 17, 2016 9:16:07 GMT -5
What type of carb?? IMHO it sounds kinda like a stuck needle valve. I can't say for certain, but one of the pros will chime in soon.
The people here have been a lot of help to me.
|
|
|
|
Post by martind28 on Apr 26, 2016 9:58:05 GMT -5
My 600D was leaking fuel overnight and the cause was the plastic fuel inlet on the Tillotson carb. The inlet was warped and I robbed one off a parts saw to fix the problem. Those inlets are easily warped, which may be caused by over tightening or improper fit. There should have been a new inlet gasket in the kit. You can install a fuel shutoff valve in the line coming out of the tank. Some models have a Brown carb, which I have no experience with.
|
|
