dewaynep
Saw Builder
Homelite Parts
Posts: 206
|
Post by dewaynep on Aug 4, 2012 13:20:03 GMT -5
Hello everyone. Well, I've been very busy with a new job that doesn't allow me the time to keep up with manual and IPL requests so I have decided to just give you the link to all of them. As I have stated before, I have limited bandwidth available so if you can refrain from downloading anything unless you absolutely need it, that would be greatly appreciated. As you know, I have watermarked all of the manuals so I would also ask that you refrain from re-selling them. If it gets out of hand I will have to take them down. Thanks. www.parkinlube.com/pdfs.aspxDewayne
|
|
|
Post by tribulation138 on Aug 4, 2012 16:53:18 GMT -5
those dealer memos are interesting to read. Its hard to believe at one point in time their was Homelite dealers and shops all around the USA. And other chainsaw shop dealers. Now a days they are non existent. Where I live there is only one dealer of chainsaw and lawn equipment. They only specialize in selling STiHL saws though.
|
|
|
Post by lesorubcheek on Aug 4, 2012 18:53:31 GMT -5
Hi Dewayne, Wanted to send you a big thank you for this incredible effort. You've put some serious effort into all these scans, and done so at a perfect resolution too. Lots of the online scans are very low resolution and you can barely make out many of the part numbers. I'm sure the entire community thanks you!
Dan
|
|
dewaynep
Saw Builder
Homelite Parts
Posts: 206
|
Post by dewaynep on Aug 5, 2012 8:30:53 GMT -5
Thanks guys. I still have boxes and boxes of manuals and IPLs to scan. I haven't been able to do much with them lately though. Maybe when the weather breaks (winter) I'll have some time to add to the list. I even have more parts to list that we haven't been able to get yet...
Dewayne
|
|
|
Post by onestep on Aug 24, 2012 8:50:04 GMT -5
Many thank for all your effort.
I am looking for any user/service information on the UT10537A Super EZ Automatic saws.
Found one in the garbage and would like to get it running again.
Thanks again for your time.
|
|
|
Post by tommyhnavix on Aug 24, 2012 9:46:27 GMT -5
I have the EZ series saw factory service info saved as a MS word document and would be glad to e-mail you a copy. If you want a copy, send me your e-mail address Tom
|
|
|
Post by georgem1242 on Nov 19, 2012 15:10:52 GMT -5
need service reapir manual for homelite 410
|
|
dewaynep
Saw Builder
Homelite Parts
Posts: 206
|
Post by dewaynep on Nov 21, 2012 20:54:04 GMT -5
See the first post.
|
|
|
Post by headnut on Dec 6, 2012 14:25:21 GMT -5
Hi My name is Bill I am looking for a Homelite Super XL Owners Manual UT 10543B Ser. 5D2950055 I looked at the list but couldn't find it. Thanks Bill
|
|
dewaynep
Saw Builder
Homelite Parts
Posts: 206
|
Post by dewaynep on Dec 6, 2012 20:26:02 GMT -5
Sorry, I don't have that one...
|
|
|
Post by headnut on Dec 6, 2012 20:42:51 GMT -5
Ok Thanks
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 1, 2013 18:02:00 GMT -5
Hi, I have a Homelite Super 2 UT 10617 A. It is an early to mid 80's model I believe. I was wondering if you had an IPL that covers that UT model. I have the one you have listed in you link of manuals - IPL # 24983 Rev 1 but that is for a mid seventies model I think. There are some differences so I was hoping you might have the one for my model. Thank you. Rich
|
|
|
Post by tommyhnavix on Mar 1, 2013 20:37:54 GMT -5
|
|
dewaynep
Saw Builder
Homelite Parts
Posts: 206
|
Post by dewaynep on Mar 2, 2013 17:00:15 GMT -5
There are about 7 different IPLs on my page for the super 2's. I'll bet the one you need is there. A hint is to use the ctrl-f feature to find something on a web page. Type in "super 2" without the quotes into the box that pops up when you hit ctrl-f. That will give you every match for that search on the web page.
Dewayne
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 2, 2013 19:47:30 GMT -5
Tommy, Thank you - I went directly to your site and found the IPL for my UT model right where you said. It shows the parts that my saw has. Excellent.
Dewayne, Thanks for your quick response and info. As you see from the above sentence, I immediately went to Tommy's site and downloaded the IPL. Thank you again.
I will be submitting a new post somewhere in the chainsaw section about an issues I have with my gas and oli tanks not having duck valves. I had these in my 1977 Super 2 and the IPL for my current saw shows there should be the valves in each one. Anyway, tomorrow. Rich
|
|
|
Post by Supercharged86 on Apr 3, 2013 10:42:28 GMT -5
Thanks guys for the GREAT publications, a monumental task at that! Cheers. Steve
|
|
|
Post by randysgirl on Oct 18, 2013 5:15:23 GMT -5
|
|