dewaynep
Saw Builder
Homelite Parts
Posts: 206
|
Post by dewaynep on Feb 21, 2012 14:23:42 GMT -5
Hi Jerry. Are you looking for 58329 (O-Ring) that replaced the gasket 63356? I have 63356, but don't have any of the O-Rings.
Dewayne
Here is the Service memo regarding the O-Rings:
TO: Homelite Branches and Dealers SUBJECT: Crankcase to Drivecase Gasket DATE: 10/1/65 Units Affected: All C and XP Chain Saws, All XL Units Instead of an 0-ring, we are now using a flat gasket between the crankcase and the drivecase in all units listed above. The use of a flat gasket virtually eliminates the danger of cocking the two parts during assembly, thereby protecting the needle bearings from damage. All units, even those which were originally built with 0-rings, may be serviced with the flat gaskets. Those which we are building now with the flat gasket cannot use the 0-ring because the 45° chamfer on the crankcase is now smaller. Please mark your parts records as follows: XL Units: 58785 0-ring Superseded by 63355 Gasket C & XP Saws: 58329 0-ring Superseded by 63356 Gasket Service Parts will automatically supply latest crankcases which will be identified with a new "dash" suffix.
|
|
|
Post by jerrycmorrow on Feb 21, 2012 18:26:18 GMT -5
hey dewayne, my IPL shows 58329 being marked out with 63356 handwritten next to it. an o-ring came off of it. your parts list says the 58329 o-ring was replaced by the 63356 gasket. guess that's what i need.
btw, the parts arrived this afternoon. everything in good shape.
thanks, jerry
|
|
dewaynep
Saw Builder
Homelite Parts
Posts: 206
|
Post by dewaynep on Feb 21, 2012 20:30:42 GMT -5
Hi Jerry. Glad the parts were what you needed. I have several of the 63356 gaskets. Just let me know when you need one. Thanks.
Dewayne
|
|
|
Post by jerrycmorrow on Feb 22, 2012 10:37:32 GMT -5
hi dewayne, need one now. what would be the shipping cost? i'll send you a MO for part and shipping. or will some worthless govt issued green paper do just as well? thanks, jerry
|
|
dewaynep
Saw Builder
Homelite Parts
Posts: 206
|
Post by dewaynep on Feb 22, 2012 11:00:39 GMT -5
Hi Jerry. Cash is fine. Check your PMs.
|
|
|
Post by lawnmowertech37 on Aug 30, 2012 22:43:03 GMT -5
dewayne i am in need of some pump parts can you give me a call 252-503-7358 i need to talk on the phone about this thanks
|
|