dave
Groundie
Posts: 2
|
Post by dave on Jan 24, 2012 22:55:48 GMT -5
Hello, I'm inquiring about a new piston and pin for a 1973 VI944, the original part number was A-67989. I have seen other listings for its replacement as A49314. Your listings shows you have an aftermarket piston from sunbelt, I'd be happy to buy the piston if you can show me some sort of cross reference that the piston is the same. Also do you have replacement clutch shoes part no. 67896-1?
|
|
dewaynep
Saw Builder
Homelite Parts
Posts: 206
|
Post by dewaynep on Jan 25, 2012 14:17:59 GMT -5
Hi, sorry but the only cross reference I have is the fact that the guy that said the Sunbelt cylinder is the same was dealing in Homelite for 20 or so years when he made that cross reference. I may have an old sunbelt catalog that I could check, but that is about all I can offer. As for the clutch shoes, I don't have those at all. Let me check on the piston and get back to you. Thanks.
Dewayne
|
|
dewaynep
Saw Builder
Homelite Parts
Posts: 206
|
Post by dewaynep on Jan 27, 2012 8:53:08 GMT -5
Dave, i was unable to find my old Sunbelt catalog, but did take some pictures and crude measurements. The pictures are here: parkinlube.com/a-67989-1%20piston.mht the measurements are as follows: Piston Diameter is 2 1/16", 1/16" rings, 1 1/2" from bottom of the dome to the bottom of the skirt. Thanks. Dewayne |
|
|
|
Post by jerrycmorrow on Jan 30, 2012 13:05:07 GMT -5
dewayne,
do you have any clutch springs for the 410, part no. 93814A; or a bucking spike for the C5, part no. 58396; or a carb kit for the C5, part no. 58535?
looking to place an order of things shown on your spreadsheet but will wait to hear from you regarding the above.
thanks, jerry
|
|
dewaynep
Saw Builder
Homelite Parts
Posts: 206
|
Post by dewaynep on Jan 30, 2012 20:09:54 GMT -5
Hi Jerry. I'm sorry, but I don't have any of those numbers. Maybe someone else does? Chainsawlady? Thanks.
Dewayne
|
|
|
|
Post by jerrycmorrow on Jan 30, 2012 22:48:54 GMT -5
thanks for looking dewayne. now, how do i place an order? please don't say paypal since i don't use it. i can send postal money order.
|
|
|
|
Post by rcaholic on Jan 30, 2012 23:56:51 GMT -5
Hey Dewayne,
How do I go about ordering 97338-1a and 97263-a?
|
|
dewaynep
Saw Builder
Homelite Parts
Posts: 206
|
Post by dewaynep on Jan 31, 2012 20:03:42 GMT -5
Jerry and RCaholic check your PMs.
Dewayne
|
|
|
|
Post by jerrycmorrow on Feb 1, 2012 0:00:28 GMT -5
dewayne,
have you been able to locate those rings for the 330 - part no. 96510?
|
|
dewaynep
Saw Builder
Homelite Parts
Posts: 206
|
Post by dewaynep on Feb 1, 2012 8:13:07 GMT -5
Hi Jerry. I will have to check in the parts I am just getting in. I am getting 3 large boxes of parts today and I have 3 large boxes of parts yet to go through. I will check the inventory sheets I have and let you know if they are supposed to be in there. Thanks.
Dewayne
|
|
|
|
Post by Super EZ fuel cap on Feb 2, 2012 17:12:04 GMT -5
Im looking for the black fuel cap to fit a super EZ model # CG-S-EZ.
Thanks
|
|
dewaynep
Saw Builder
Homelite Parts
Posts: 206
|
Post by dewaynep on Feb 2, 2012 19:44:47 GMT -5
That should be an A-65283-A. I don't have one on my list, Anyone else?
Dewayne
|
|
|
|
Post by chainsawlady on Feb 2, 2012 20:16:07 GMT -5
There were two different types on the S-EZ. One had the duckbill under the brass plug on the outside of the cap. The other had the duckbill under the silver plug on the inside middle of the cap. Which do you want? Why are you wanting a new cap? Is it because it leaks gas when you turn saw on its side? If this is the reason it probably is the duckbill that are in these caps. If they are black they go to mush after so long. Let me know and I can supply either cap. May have good used caps with new duckbills for one-half price.
chainsawlady
|
|
dewaynep
Saw Builder
Homelite Parts
Posts: 206
|
Post by dewaynep on Feb 2, 2012 20:17:55 GMT -5
Thanks Chainsawlady. I knew someone could help him.
|
|
|
|
Post by lmness on Feb 3, 2012 12:33:22 GMT -5
There were two different types on the S-EZ. One had the duckbill under the brass plug on the outside of the cap. The other had the duckbill under the silver plug on the inside middle of the cap. Which do you want? Why are you wanting a new cap? Is it because it leaks gas when you turn saw on its side? If this is the reason it probably is the duckbill that are in these caps. If they are black they go to mush after so long. Let me know and I can supply either cap. May have good used caps with new duckbills for one-half price. chainsawlady IT'S FOT MY GRANDFATHER. HE LOST THE GAS CAP SO I HAVE NO ANSWERS.. HE JUST ASKED ME TO FIND ONE ONLINE FOR HIM SINCE HE COULD NOT LOCATE ONE LOCALLY. I COULD PURCHASE BOTH IF NEEDED. |
|
|
|
Post by 1ruralmailman on Feb 5, 2012 15:15:43 GMT -5
i need a carb kit for a homelite 410. i believe that is a walbro ws16a.this is the number on it anyway.
thanks
rob
|
|
dewaynep
Saw Builder
Homelite Parts
Posts: 206
|
Post by dewaynep on Feb 6, 2012 9:40:54 GMT -5
That would be a 95893 Homelite repair kit that includes everything, needles, etc... Or, if you just need gaskets and diaphragms you can use K10-WS. I have the 95893-A kit and can get you the K10-WS kit.
|
|
|
|
Post by kinslej on Feb 11, 2012 12:41:32 GMT -5
I need a 330 chain saw starter cord housing
|
|
dewaynep
Saw Builder
Homelite Parts
Posts: 206
|
Post by dewaynep on Feb 11, 2012 20:46:39 GMT -5
Recoil starter housing should be part number A-94736 or A-02565. I have one. Check your PMs.
Dewayne
|
|
|
|
Post by jerrycmorrow on Feb 21, 2012 12:37:00 GMT -5
hey dewayne,
did you happen to stumble across any of the o-rings, no. 63356?
thanks, jerry
|
|
