|
Post by sliceoflife on Dec 10, 2023 15:30:40 GMT -5
Hi everyone. Just registered. Have a super xl auto and 775g and recently bought an 1130g to fix up. Ran into some issues that I have been working on and finally getting it ready to use. One problem I am unsure how to fix is a fairly significant gear oil leak.
It leaks out all around the shaft that the sprocket rides on... looking at the parts list, there appears to be no gasket or seal there, maybe further in within the gear case... just shaft and bearing parts where the oil seems to be manifesting, so I am kind of having to guess what part would allow this leak.
anyone know what part is likely the culprit of this leak?
My best guess is part 13 on page 8, 56256-A
Does this sound correct?
|
|
|
Post by pioneer1200a on Dec 11, 2023 23:32:19 GMT -5
I looked over the parts List and that is the only seal, I would imagine that it is the only thing keeping the oil in.
Below is the only Source of a new seal i can find, but the part number is 56256B instead of 56256A. I don't know what the differences are.
Good Luck, I hope this helps
www.ebay.ca/itm/185228310510
|
|
|
Post by KyleW95 on Dec 17, 2023 0:35:45 GMT -5
Yeah, #13, 56256 is the only seal for it. 56256-B is an updated part number from 56256-A. I used the -B’s on my 1130 when I mechanically restored it.
|
|