|
Post by james64 on Oct 22, 2023 1:43:51 GMT -5
|
|
|
Post by blythkd on Oct 22, 2023 8:28:15 GMT -5
Very nice. Couldn't find a bar that said Homelite on it? That would be the final finishing touch.
My son did the same thing a couple years ago on a 360, only had to buy 2 or 3 parts.
Gotta give you all a bunch of respect for building saws from parts!
|
|
|
Post by james64 on Oct 22, 2023 14:15:21 GMT -5
Very nice. Couldn't find a bar that said Homelite on it? That would be the final finishing touch. My son did the same thing a couple years ago on a 360, only had to buy 2 or 3 parts. Gotta give you all a bunch of respect for building saws from parts! The last time I looked at bars, there were no pristine or new bars with Homelite but ya, I will be looking for one of those. I just looked again and same thing. Lots of aftermarket and several used that have Homelite on the bar but no new or new old stock.
|
|
|
Post by onlyhomelites on Oct 22, 2023 17:27:09 GMT -5
I don't know the UT of the short block I bought so if any of you have suggestions please feel free to add your suggestions. It's modeled after the 10655 so I may go with that. Oh and that blue spark plug boot has got to go so I have a black one on the way. That UT# would be perfect...no one would ever know that it was a "built" saw!
|
|
|
Post by blythkd on Oct 22, 2023 19:36:02 GMT -5
I could take a look for a bar. I know I have some 16" in .325 pitch just not sure at 3/8. Maybe a 14"?
|
|
|
Post by james64 on Oct 22, 2023 20:24:56 GMT -5
I could take a look for a bar. I know I have some 16" in .325 pitch just not sure at 3/8. Maybe a 14"? I would greatly appriciate it. I'd do a 14"
|
|
|
Post by blythkd on Oct 25, 2023 19:30:05 GMT -5
The only 14" Homelite bar I could find in 3/8 pitch has "Homelite Classic" painted on it. The 14 or 16" bars I have that would look right, are all .325 pitch. Technically, the roller sprocket in the nose of the bar could be changed but I would think that would be an absolute last resort.
|
|
|
Post by james64 on Oct 25, 2023 20:52:35 GMT -5
|
|
|
Post by james64 on Oct 30, 2023 16:24:39 GMT -5
Very nice. Couldn't find a bar that said Homelite on it? That would be the final finishing touch. My son did the same thing a couple years ago on a 360, only had to buy 2 or 3 parts. Gotta give you all a bunch of respect for building saws from parts! Hows this blythkd? Much better.....
|
|
|
Post by blythkd on Oct 30, 2023 18:48:40 GMT -5
That looks sharp! Looks like a new saw, right out of the box...back in the 80's!
|
|