downndirty
Groundie
Seeking a ccylinder head for a 600D
Posts: 8
|
Post by downndirty on Oct 16, 2023 18:35:56 GMT -5
Hey guys, does anyone know where to source duckbill valves for McCulloch 10-10 Automatic oil tank caps, I've hit the end of the road for searching. Thank you
|
|
|
Post by edju1958 on Oct 16, 2023 18:53:44 GMT -5
Mark Heimann in Iowa or Max Rowe in Va.Mark can be contacted on AS & Max can be contacted there as well,but his screen name is knightmax.Max also is on FB as Maxthemacman & he sells on eBay too. In a pinch a Homelite fuel cap will work on the Mac saws.
|
|
|
Post by ronaldt on Oct 16, 2023 19:33:43 GMT -5
Mark Heimann in Iowa or Max Rowe in Va.Mark can be contacted on AS & Max can be contacted there as ell,but his screen name is knightmax.Max also is on FB as Maxthemacman & he sells on eBay too. In a pinch a Homelite fuel cap will work on the Mac saws.
Mark lives about an hour and a half away from me. He has a HUGE inventory of McCulloch parts and is a wealth of knowledge. Pm me if you can't get in touch with him.
|
|
|
Post by bamaboilermaker on Oct 17, 2023 11:49:43 GMT -5
i did not know that you could use a Homelite oil cap on a Mac 10-10. I have a good running 10-10 but the threads on the cap are completely buggered up. i know the thread pitch on the SXL caps is .75" x 16, the Mac thread pitch looked much coarser. I will have to check it out.
|
|
|
Post by bamaboilermaker on Oct 17, 2023 11:51:02 GMT -5
please disreguard. i saw that you said fuel cap not oil cap. Still worth a try.
|
|