|
Post by Jarhead ☠ on Aug 20, 2023 14:18:17 GMT -5
So I just picked up this complete 707D with a 7/16 roller nose bar in Riverton Wyoming. It was very dirty and full of dust(that's Wyoming for ya) but it has spark and a ton of compression. I started taking it apart to clean it and give the carb a bath. It had 30yr old gas in it so it really stunk up the cab of my truck.
|
|
|
707D
Aug 20, 2023 19:32:03 GMT -5
Post by edju1958 on Aug 20, 2023 19:32:03 GMT -5
Wow,nice find Al! Usually when ya find a saw like this it's missing half the saw.
I guess you got settled in by now as you're back to collecting & working on saws again.
|
|
|
Post by ronaldt on Aug 20, 2023 20:04:41 GMT -5
That is very complete! Usually the exhaust "shroud" and the recoil cover are missing. Good find! I have a 707d that has been old faithful for vintage cutting.
|
|
|
Post by Jarhead ☠ on Aug 21, 2023 8:13:33 GMT -5
Yes Ed I've settled in nicely and I've been searching all over for saws. Got a C-72 coming my way tomorrow from our mechanic. I'll post more pictures and a video soon.
|
|
|
707D
Aug 22, 2023 11:35:17 GMT -5
via mobile
undee70ss likes this
Post by Jarhead ☠ on Aug 22, 2023 11:35:17 GMT -5
So I was able to get the saw running today (like I didn't think I would) and as you can see the saw is 100% complete, not sure about the bar but it does have some red lines on it under the cover. youtu.be/9HvjTe2XTMc Attachments:
|
|
|
707D
Aug 23, 2023 17:26:47 GMT -5
Post by w30bob on Aug 23, 2023 17:26:47 GMT -5
Nice saw!! And the starter cover isn't all beat to shit like most. Nice snag!!
;O)
|
|