im
Groundie
Posts: 1
|
Post by im on Aug 7, 2023 8:55:22 GMT -5
The buzzer/alarm on my Bearcat 65 is going off as soon as the ignition key is turned and the outboard will not attempt to start. I have disconnected the battery and after re-connecting the alarm still sounds. Any ideas?
|
|
|
Post by homedelightman on Sept 7, 2023 17:28:48 GMT -5
Low oil pressure, over temperature are two reasons I can remember that makes the control buzz. I thought it buzzed until it started, then the buzz would stop.
|
|
|
Post by David Riker on Nov 20, 2023 13:03:02 GMT -5
There is a micro switch in the control box so that in the neutral position, the buzzer is deactivated. This microswitch is stuck or out of adjustment.
|
|