|
|
Post by ibmike on Jul 2, 2023 7:55:02 GMT -5
Bought a set of Isolators from Brent last week, pulled 330#2 out from under the work bench installed them, and was able to pull the starter rope. Gas and oil in and started pulling and it runs , set the low speed needle runs smooth. Thanks to all for the help and advise.It was the Isolators that locked up the pull starter.
|
|
|
|
Post by blythkd on Jul 2, 2023 8:02:16 GMT -5
Well that's certainly good to know. You mean it cranks normally now after replacing the isolators? We'll have to remember that one. I say we because I probably won't!
|
|
|
|
Post by ibmike on Jul 2, 2023 8:17:45 GMT -5
Hi Brent, yes it cranks like 330#1, it is something to keep in mind for sure, thanks again
|
|
|
|
Post by blythkd on Jul 2, 2023 9:30:21 GMT -5
Had the original isolators failed? Or just got soft? Or what?
|
|
|
|
Post by ibmike on Jul 3, 2023 6:34:38 GMT -5
They seemed to be softer than the ones you sent me, but looked to be in perfect shape, i guess just to much play in them.
|
|
