|
Post by wildmanwill on May 15, 2023 17:03:24 GMT -5
Looking for a combination wrench part number A-24284 for the super ez model.Its a specialty wrench that's extra short to fit the sparkplug with it being so close to the handle.Thankyou
|
|
okie
Saw Builder
Posts: 201
|
Post by okie on May 15, 2023 19:36:03 GMT -5
I made one. Just to give you a hint. I took a spark plug socket that has hex on top for a wrench or a 3/8 drive ratchet and then cut it too length so as to fit inside the handle onto the spark plug and I can use a end wrench or a small crescent to loosen the spark plug instead of using a ratchet wrench. Hacksaw takes longer, I just chucked mine in a chop saw and cut it so as it would fit inside the Chainsaw's handle. Here is A PICTURE OF ONE @ this link using your part number: they are sold out chainsawr.com/collections/homelite-1/wrenchYou might try posting up a saved search on fleece bay and when one surfaces you will get a email notice.
|
|
|
Post by wildmanwill on May 16, 2023 3:15:21 GMT -5
I made one. Just to give you a hint. I took a spark plug socket that has hex on top for a wrench or a 3/8 drive ratchet and then cut it too length so as to fit inside the handle onto the spark plug and I can use a end wrench or a small crescent to loosen the spark plug instead of using a ratchet wrench. Hacksaw takes longer, I just chucked mine in a chop saw and cut it so as it would fit inside the Chainsaw's handle. Here is A PICTURE OF ONE @ this link using your part number: they are sold out chainsawr.com/collections/homelite-1/wrenchYou might try posting up a saved search on fleece bay and when one surfaces you will get a email notice. Yeah I could make one but I'm really looking for the OEM tool but thanks for the idea.
|
|
okie
Saw Builder
Posts: 201
|
Post by okie on May 16, 2023 7:49:15 GMT -5
I made one. Just to give you a hint. I took a spark plug socket that has hex on top for a wrench or a 3/8 drive ratchet and then cut it too length so as to fit inside the handle onto the spark plug and I can use a end wrench or a small crescent to loosen the spark plug instead of using a ratchet wrench. Hacksaw takes longer, I just chucked mine in a chop saw and cut it so as it would fit inside the Chainsaw's handle. Here is A PICTURE OF ONE @ this link using your part number: they are sold out chainsawr.com/collections/homelite-1/wrenchYou might try posting up a saved search on fleece bay and when one surfaces you will get a email notice. Yeah I could make one but I'm really looking for the OEM tool but thanks for the idea.
|
|
okie
Saw Builder
Posts: 201
|
Post by okie on May 16, 2023 7:53:03 GMT -5
I understand. I like to have the correct scrench handy also when in the woods and a roller tipped chain will jump off often when trimming small twigs. Them homelite ones seem to be rare as hens teeth. After I posted I seen this china clone type scrench that might work on a EZ with a 5/8 spark plug and the 3/4 inch bar nuts. I'm not sure link to view on fleece bay. www.ebay.com/itm/293327357732?hash=item444bac4724:g:PyYAAOSwDnpdyx3p
|
|
|
Post by wildmanwill on May 16, 2023 18:12:17 GMT -5
I understand. I like to have the correct scrench handy also when in the woods and a roller tipped chain will jump off often when trimming small twigs. Them homelite ones seem to be rare as hens teeth. After I posted I seen this china clone type scrench that might work on a EZ with a 5/8 spark plug and the 3/4 inch bar nuts. I'm not sure link to view on fleece bay. www.ebay.com/itm/293327357732?hash=item444bac4724:g:PyYAAOSwDnpdyx3pThankyou for finding that listing If I can't find an OEM one I may give that a try
|
|
|
Post by bdm53ent on May 17, 2023 9:19:56 GMT -5
I understand. I like to have the correct scrench handy also when in the woods and a roller tipped chain will jump off often when trimming small twigs. Them homelite ones seem to be rare as hens teeth. After I posted I seen this china clone type scrench that might work on a EZ with a 5/8 spark plug and the 3/4 inch bar nuts. I'm not sure link to view on fleece bay. www.ebay.com/itm/293327357732?hash=item444bac4724:g:PyYAAOSwDnpdyx3p Looks identical to the one I picked up years ago and works great.
|
|
okie
Saw Builder
Posts: 201
|
Post by okie on May 26, 2023 18:56:42 GMT -5
Just a update. I ordered couple of them from fleece bay that is in the link I posted above.
The scrench will not work for removing the spark plug, it only fits the bar nuts.
|
|