|
|
Post by edju1958 on Jan 30, 2023 10:46:52 GMT -5
My latest SEZ is without a chain.I have a couple new chains that are 60 DL,but they're too long.Is the chain supposed to have 56 or 58 DL?
|
|
|
|
Post by blythkd on Jan 30, 2023 12:42:14 GMT -5
59
|
|
|
|
Post by xl130 on Feb 4, 2023 14:12:08 GMT -5
I’m surprised the 60 won’t fit. I’m about 99% sure that the Oregon chains that I’ve bought for my 16” bars were 60. Possible the bars you have are different than the Windsor style I have 🤔
|
|
|
|
Post by edju1958 on Feb 4, 2023 20:23:34 GMT -5
I have the bar & chain that came with the saw.The bar is OK,but the chain was seized in several places.I sprayed it down with Deep Creep & worked most of it free.I put some heat to 2 stubborn spots & forgot about it for 2 days.Yesterday I worked it again & got those 2 spots to free up (mostly).I put the chain on the saw loosely & started the saw & ran it a bit with the oiler.I had to back the chain up manually a couple of times,then rev the saw up & it freed up nicely.The chain was a new chain when someone let the saw set.I'll see about getting pics of the saw on here.
|
|
