|
Post by Pulsar 922 on Nov 28, 2022 22:59:29 GMT -5
In need of some new rings for a Super Mini, NOS ones seem to be in short supply.
Does anyone know the sizing for Caber Rings? Are the dimensions listed the bore size?
Thanks in advance!
|
|
|
Post by Pulsar 922 on Nov 30, 2022 15:38:46 GMT -5
Success...I was able to find Caber rings in the exact size.
|
|
|
Post by Pulsar 922 on Feb 3, 2023 17:00:59 GMT -5
Rings have arrived from Greece. They are not model specific and un-gapped.
The 4th-5th edition service manuals do not list an end-gap specification for the Super EZ/Mini.
Anyone have access to the 6th edition service manual to check if a spec is listed for this model ?
Recommendations for what the end-gap should be ? I've some grinding to do...
Thanks
|
|
|
Post by xl130 on Feb 3, 2023 22:29:48 GMT -5
If no one can get that spec then , I think I have a set of NOS rings. If I can find them I’ll put one on a Super Mini cylinder and put some feeler gauges in.
|
|
|
Post by Pulsar 922 on Feb 3, 2023 23:37:18 GMT -5
If no one can get that spec then , I think I have a set of NOS rings. If I can find them I’ll put one on a Super Mini cylinder and put some feeler gauges in. Thanks, I appreciate that ! The original rings are about .080", so I'm guessing the recommended spec is .070-.080" with a max allowed of .085" as in other models. I had a chance to get a NOS piston/rings off Ebay but seller never bothered to return my inquiries about shipping to Canada.
|
|
|
Post by Chad C. on Mar 5, 2024 21:00:04 GMT -5
What are the dimensions of the rings? I know the bore is 1 9/16", but what is the groove size or ring thickness? I'm trying not to spend almost the same amount of money for rings as for an aftermarket piston and cylinder. Seems all the places where I've found rings for my saw they want too much money. So please, if any of y'all have the ring size let me know.
|
|
|
Post by Pulsar 922 on Mar 5, 2024 22:23:20 GMT -5
The Caber rings I used are OUT OF STOCK. Plus side is Leon has NOS rings in stock.
Ring thickness is 1.59mm .
|
|
|
Post by Chad C. on Mar 7, 2024 11:35:14 GMT -5
Thank you.
|
|
|
Post by xl130 on Mar 7, 2024 12:47:18 GMT -5
Looks like I did not respond to this line I said so would. Sorry!!
|
|
|
Post by Chad C. on Mar 23, 2024 21:27:36 GMT -5
The Caber rings I used are OUT OF STOCK. Plus side is Leon has NOS rings in stock. Ring thickness is 1.59mm. I think Homelite worked primarily in Standard units. 1/16" thick rings.
|
|
|
Post by Pulsar 922 on Mar 23, 2024 22:05:46 GMT -5
The Caber rings I used are OUT OF STOCK. Plus side is Leon has NOS rings in stock. Ring thickness is 1.59mm. I think Homelite worked primarily in Standard units. 1/16" thick rings. Yeah, okay, sixty two and a half thousandths.
|
|
|
Post by kevinm1980 on Apr 4, 2024 14:31:19 GMT -5
I use rings from aliexpress, they are meant for a more modern locating pin and have to file fit..but for 5$ canadian for a set to my door I dont care..lol
|
|
|
Post by Pulsar 922 on Apr 5, 2024 16:12:18 GMT -5
Looks like I did not respond to this line I said so would. Sorry!! No worries! The fitted Caber rings are working well, with minimal runtime not even broke in yet, putting out 165 psi on a trusted gauge.
|
|