|
Post by ruffcut on Jul 22, 2022 13:12:36 GMT -5
This one followed be home yesterday along with a 9-26.
|
|
|
Post by w30bob on Jul 22, 2022 13:52:28 GMT -5
Don't ya just hate that???
Very nice!!
;O) bob
|
|
|
Post by ruffcut on Jul 22, 2022 14:42:56 GMT -5
Quick check. Missing/broken muffler protector. Missing choke lever which is odd. Good spark. Fuel tank is dirty and missing internal fuel line. Tried starting her but won't fire. Noticed when pulling the starter rope compression wasn't there. Checked compression and it's at a pitiful 50lbs. Hope the rings are just sticking and squirted some penetrating oil to see if that will loosen the rings up some. The owner did say it's been sitting for several few years.
|
|
|
Post by ruffcut on Jul 22, 2022 15:54:13 GMT -5
Uh-Oh!
Ouch! Yeah, got my work cut out on this one!
|
|
|
Post by undee70ss on Jul 22, 2022 16:06:29 GMT -5
A lot more than stuck rings
|
|
|
Post by w30bob on Jul 22, 2022 17:25:20 GMT -5
Hmmm.......on second thought......I don't think it followed you home under its own power........maybe you dragged it kicking and screaming!
I see there's new pistons with rings on eBay for $30, but no used cylinders. Did it share its cylinder with any other saws?
Bearings gone too?
;O) bob
|
|
|
Post by undee70ss on Jul 22, 2022 17:49:54 GMT -5
I don't think it followed you home under its own power........maybe you dragged it kicking and screaming! I see there's new pistons with rings on eBay for $30, but no used cylinders. Did it share its cylinder with any other saws? Bearings gone too? ;O) bob Super 1050 also used the same cylinder, but they are tough to find.
|
|
|
Post by edju1958 on Jul 22, 2022 17:51:05 GMT -5
If the 1130G used the 100cc cylinder you're SOL,there are none to be had anywhere.Not unless by a miracle one shows up on Feebay,but it'll have a premium price! Sorry to break the bad news to you. Edit:there's one possibility & that's if the cylinder isn't too badly scored you can get it re-chromed at U.S.Chrome,but it's awfully pricey - around $275-$300.
|
|
|
Post by xl130 on Jul 24, 2022 19:36:05 GMT -5
It sure does look some nice though. Definitely worth waiting to find some parts! Nice saw!
|
|