|
|
Post by 99tahoe on Aug 10, 2020 19:53:07 GMT -5
well picked up 2 more projects how rare is the xl114 the 26 should be fun to work on and are carb kits available for the 26 Attachments:
|
|
|
|
Post by Jarhead ☠ on Aug 10, 2020 21:27:50 GMT -5
Well the 26LCS is the 2nd gas powered saw Homelite made and is desired somewhat. Looks sorta similar to the 5-30 but has the float style carb like the 20MCS so it has to turn the carb to cut sideways.   |
|
|
|
Post by 5terrysupersaws on Aug 10, 2020 22:04:11 GMT -5
well picked up 2 more projects how rare is the xl114 the 26 should be fun to work on and are carb kits available for the 26 The XL-114 is not very common, I've only seen pic's of a couple of other ones . Think they were destined for the International market, there are 3 over in Sweden . It's a 50 year old chainsaw with C.D.I. that's unique to the XL-114 . Very cool !!! and collectible ! Post up a picture of the ID tag please ! Thanks |
|
|
|
Post by 99tahoe on Aug 11, 2020 2:16:29 GMT -5
here is a pic of the tag Attachments:
|
|
|
|
Post by Jarhead ☠ on Aug 26, 2020 13:16:06 GMT -5
Hey did you get them in Williamsport Pa? The 26LCS looks like the one being offered, missing the pull cord.
Well I asked about them and he immediately changed the ad to sold so I'm thinking it was you.👍
|
|
|
|
Post by 99tahoe on Aug 26, 2020 16:11:57 GMT -5
yep
|
|
bhound
Dumpster Diver
YOU either LIKE BACON or your WRONG!
Posts: 22
|
Post by bhound on Aug 26, 2020 19:28:50 GMT -5
Them's some nice oldies!99tahoe are you and Jarhead Pennsylvania boys?
|
|
|
|
Post by Jarhead ☠ on Aug 26, 2020 20:35:38 GMT -5
I just drive a tractor trailer to Pa. 5x's a week and noticed that ad on FB market and wanted to drive up to get them.
|
|
|
|
Post by Jarhead ☠ on Aug 26, 2020 20:40:42 GMT -5
|
|
|
|
Post by 99tahoe on Sept 23, 2020 18:59:55 GMT -5
hey thanks for the link have not dove into the 26 yet the 114 is done and runs great
|
|
|
|
Post by 99tahoe on Dec 24, 2021 22:09:15 GMT -5
well i finaly got started on the 26lcs and is there a trick to pulling off the starter cover i pulled all the screws out of it and even the nut on the pull start pully but it wont come off any info would be appreciated thanks
|
|
|
|
Post by onlyhomelites on Dec 25, 2021 8:59:42 GMT -5
It's been a while since I worked on one of this, but if I remember correctly, there is an index pin between the starter rope drum and the starter hub. So the pulley may be a bit of work coming off initially. Once you get to that point, you've got to get the spring and starter housing to work it's way over the starter hub. It's not terribly difficult once you can see what you are working with.
|
|
|
|
Post by 99tahoe on Dec 25, 2021 15:51:44 GMT -5
well I got the starter housing off and pull start but I had 3 ball bearings come out but I did not notice where they came from anybody have any info or pic on how they go back ?
|
|
|
|
Post by onlyhomelites on Dec 25, 2021 19:08:25 GMT -5
|
|
|
|
Post by 99tahoe on Dec 26, 2021 19:34:34 GMT -5
thanks that will help
|
|
|
|
Post by 99tahoe on Dec 30, 2021 20:55:44 GMT -5
hello question for someone out there if i need a new condencer for the 26 where might i get one part number 72396 thanks
|
|
|
|
Post by onlyhomelites on Dec 31, 2021 21:19:46 GMT -5
That will be a tough one...I've never had that part in stock. You'll have to hope there is a part# stamped into the condenser case and then hope again that there's some info on interchange floating around the web!
|
|
|
|
Post by edju1958 on Jan 1, 2022 12:52:07 GMT -5
Leon,you got stuck on a 26 LCS (I think) back in Oct.2018.The original condenser was shooting spark 1/4 in.which gave you the false impression it was good.Finally you ended up replacing it & all was good.
99tahoe,you might want to give Bob Johnson a call to see if he has the parts you need,607-638-9297.
|
|
|
|
Post by onlyhomelites on Jan 1, 2022 21:43:47 GMT -5
I think that was the old Mall 2MG I was working on at the time; IIRC I used a coil and condenser from the XL-123 to get it going!
|
|
|
|
Post by sparky on Jan 3, 2022 13:21:50 GMT -5
Would not surprise me if Chainsaw Lady had some condensers in stock but they are for now unobtainable.
|
|
