|
|
Post by edju1958 on Aug 4, 2020 20:37:52 GMT -5
I bought this XL-1 about 10 days ago & just got it delivered tonight.I was curious to see if it had spark & I tested it immediately.I saw one spark while pulling it over & noticed the plug didn't want to fit in the boot properly,so I pulled the wire out of the boot & the spring came off the wire.I put it back on & checked again & this time it had good spark.There are parts missing,as usual,but nothing I can't handle.It'll need an air filter cover,bracket,air filter,bar plates,& a bar stud nut.It'll also need a bar & chain.The saw has great compression.I'll go through it more & clean it tomorrow.
|
|
|
|
Post by edju1958 on Aug 5, 2020 18:36:58 GMT -5
It's a runner! There was more missing on the saw than I originally thought.It was also missing the choke lever,choke lever grommet,& the grommet for the hi & lop needles.I pieced it together & gave it a prime & it fired.I figured I'd put fuel in it & see what happens,to my disbelief it fired up after 8 pulls & ran flawlessly.I finished piecing it together & here's what it looks like.Once in a while I get lucky with a saw.Lol I don't know why the 1st 2 pics are so blurry,I stood in the sasme spot for all 3 pics.Maybe it has something to do with all the cracks in my screen from dropping the phone 1000's of times? Or maybe it's all the drool?
|
|
