|
Post by Jarhead ☠ on Jul 15, 2020 9:37:15 GMT -5
I'm looking to get it for the spur sprocket and upgrade the drum. Thanks, Al D.
|
|
|
Post by fossil on Jul 15, 2020 10:29:44 GMT -5
I'm looking to get it for the spur sprocket and upgrade the drum. Thanks, Al D. 1982 Oregon catalog says 21715 is for an XL-12 after SN 1735838. I believe this one became Power Mate 30666 which is for the larger diameter crankshaft like the 450, 550 and XL & VI 900. For your XL-123 for a later Oregon list, If you have the 3" clutch, 6 shoe I think. Measure to be sure, the later catalogs call for Power mate 12190 or newer Power Mate 30685 If you have the 2-5/8" "S" clutch with 5/8" bearing you want Power Mate 30672. A bit confusing with the different clutches and races.
|
|
|
Post by xl130 on Jul 20, 2020 14:03:06 GMT -5
How did you make out with this? My XL130 Spur is ready to be changed and I would like to switch over to a rim drive.
|
|
|
Post by Jarhead ☠ on Jul 20, 2020 17:53:53 GMT -5
I didn't get one yet, need to make sure the 123 is good with the new piston.
|
|