|
|
Post by Homelitexl923 on Jul 12, 2020 5:42:31 GMT -5
Hi, looking for a 24+ inch bar and chain for my xl 923. Any help would be greatly appreciated.
Thanks.
|
|
|
|
Post by edju1958 on Jul 12, 2020 9:15:40 GMT -5
Ebay has Archer 24 in.bar & chain combos for $70.
|
|
|
|
Post by Homelitexl923 on Jul 12, 2020 21:53:39 GMT -5
yeah kind of looking for a bar and chain thats a bit longer like a 28 inch or there abouts.
|
|
|
|
Post by rowdy235 on Jul 13, 2020 0:17:49 GMT -5
If you’re not wanting an OE bar I saw several decent options on eBay, just do a search for “homelite xl 923 bar chain”
|
|
|
|
Post by Homelitexl923 on Jul 13, 2020 0:22:37 GMT -5
If you’re not wanting an OE bar I saw several decent options on eBay, just do a search for “homelite xl 923 bar chain” just tried but couldnt find much. some of them were the wrong gauge anyway. |
|
|
|
Post by rowdy235 on Jul 13, 2020 13:01:13 GMT -5
The gauge shouldn’t be a concern if you are buying the bar and chain. You will probably want to replace the drive sprocket in any case, which you would want to match with the pitch of your chain.
What gauge and pitch are you wanting/have?
|
|
|
|
Post by Homelitexl923 on Jul 15, 2020 22:22:24 GMT -5
.050" gauge and 3/8" pitch.
|
|
|
|
Post by rowdy235 on Jul 15, 2020 23:29:26 GMT -5
I’d pry buy this one if it was me as I am fond of Oregon products, not a bad deal either, get them while you can as they have discontinued the mount www.ebay.com/itm/123927732726Otherwise this will save a few bucks, I’ve bought from the seller before and had good luck. www.ebay.com/itm/180732861313 |
|
|
|
Post by Homelitexl923 on Jul 16, 2020 3:02:23 GMT -5
Those are great but i am looking for a 28 or 20 inch bar.
|
|
|
|
Post by edju1958 on Jul 16, 2020 7:51:55 GMT -5
Does it have to be a sprocket nose,or would you be happy with a hard nose?I put a 28 in.hard nose Mac bar on mine & the price is good too at $48.
|
|
|
|
Post by Homelitexl923 on Jul 16, 2020 20:30:49 GMT -5
i dont mind but sprocket nose are meant to be a bit better, but i dont really mind.
|
|
|
|
Post by edju1958 on Jul 16, 2020 21:19:52 GMT -5
Here's one.
Here's another
This is the bar I put on my 923.
There's no way this bar fits on a C series saw,the bar mount pattern needs to be an F014 mount to fit a C series & this bar is a D096.
|
|
|
|
Post by Homelitexl923 on Jul 17, 2020 3:23:05 GMT -5
yes the bar has to be either a D196 or a D096 i think not sure if these are.
|
|
|
|
Post by edju1958 on Jul 17, 2020 7:12:07 GMT -5
The one I put on my saw is a D096.If you look through the whole description you'll see it is.The other 2 I'm not sure about,you'd have to research them.
|
|
|
|
Post by Homelitexl923 on Jul 17, 2020 19:28:07 GMT -5
ok thanks for the help.
|
|
