|
|
350 360?
Jun 30, 2020 12:01:49 GMT -5
via mobile
Post by ellsworth74 on Jun 30, 2020 12:01:49 GMT -5
found a 350 I think but it has a 360 starter cover. Lot# is b6203. It this a 350 or 360 please?
|
|
|
|
Post by lesorubcheek on Jun 30, 2020 18:11:35 GMT -5
One big difference between a 350 and 360 is the number of bolts on the intake manifold attaching to the cylinder. 350s only had 2 bolts where 360s had 4. Problem is it's hard to see it without separating the tank/rear handle from the main engine housing. If it's been sitting around for a while, odds are it'll need a boot so you'll be doing the split to re-boot it.
Dan
|
|
|
|
Post by onlyhomelites on Jul 4, 2020 9:45:39 GMT -5
Is the UT# still on the saw?
|
|
|
|
350 360?
Jul 5, 2020 18:12:47 GMT -5
via mobile
Post by ellsworth74 on Jul 5, 2020 18:12:47 GMT -5
Is the UT# still on the saw? The 2nd digit is almost gone so either a 3 or 8 |
|
