|
|
Post by pumpkinracing on Mar 21, 2020 15:43:33 GMT -5
Looking for I.p.l. For 20dp3-1 bought a short block. Brand new it has the same cylinder as a 20mcs. I pulled jug and removed the piston. It doesn’t have the same piston number but the piston mics the same as the mcs. Looking at what else I can use . Seals governor etc.
anthony
|
|
|
|
Post by onlyhomelites on Mar 26, 2020 23:10:45 GMT -5
Hi Anthony, check your email...I just sent a digital copy that I downloaded from Riverside Pumps a few years ago.
|
|
|
|
Post by pumpkinracing on Mar 27, 2020 18:09:34 GMT -5
Thanks I got it very helpful i appreciate it.
Anthony
|
|
|
|
Post by sawnami on Mar 29, 2020 7:40:41 GMT -5
I believe that the cylinder on the 20 series pumps, generators, blowers, has the exhaust clocked 180 degrees from the orientation on the 20MCS. I found that out when I tried to match up a NOS piston and cylinder to one of my 20 MCS's. The exhaust port is designed a little different also. Let me know if you need any help on the governor.
|
|
