|
Post by 99tahoe on Mar 16, 2020 14:27:11 GMT -5
well got another 360 up and running runs great then i put the bar and chain on it and i just cant get it tuned in i get the chain to stop spinning then it wants to die then i lean it out and the chain spins like crazy any ideas ..... changed seals both sides rebuilt carb replaced boot and gaskets and replaced fuel and impulse line thanks
|
|
|
Post by ettrick on Mar 16, 2020 14:57:37 GMT -5
Maybe the clutch is engaging to soon. Broken parts or weak spring? Did you have a tach on it to check rpm? Dan
|
|
|
Post by onlyhomelites on Mar 16, 2020 21:45:24 GMT -5
It sounds like the clutch drum bearing is seized or there is a missing thrust washer. See if the clutch drum is free with the saw off. If so, Ettrick is right about a potential weak spring or broken shoe.
|
|
|
Post by 99tahoe on Mar 20, 2020 13:04:17 GMT -5
hello it was the clutch spring someone put the wrong ones in to the clutch had a bad clutch with good springs works fine now
|
|
|
Post by onlyhomelites on Mar 20, 2020 18:33:25 GMT -5
Great to hear!
|
|