|
Post by 99tahoe on Feb 18, 2020 14:15:04 GMT -5
well I have another 360 rebuilt carb / new fuel line and impulse line / new intake boot and gaskets also replace the clutch side crank seal it started up pretty quick but it would not idle right .... I could get it to idle with carb adjustment then it revs up like there is a air leak the only seal I did not replace is behind flywheel any ideas what could be going on with this thing ... I have rebuilt a few and never had this happen . thanks
|
|
|
Post by onlyhomelites on Feb 18, 2020 21:26:39 GMT -5
Honestly I find more flywheel side seals worn out than clutch side...I'd start there if you are comfortable that the carb is right.
|
|