Post by xl130 on Jan 4, 2020 17:03:49 GMT -5
I'm getting ready to reassemble a newly acquired XL-2. Last owner said that it wouldnt run. It is pretty much spotless so I fugure its got to be something simple.....hopefully.
Good spark, clean looking cylinder and piston but horrible looking inside the carb. Lots of orange looking crud. Carb kit to be installed.
I noticed while reviewing photos the oil tank hoses the I took prior to disassembling everything that it may have been hooked up wrong. Looks like it may have been sucking the oil into the crank case.
Can someone who is familiar with these models review this photo and confirm that the lines were backwards.
D0BEF027-6C79-4168-8B30-0618AE156CB8 by XL 130 Homelite, on Flickr
5B1F6D05-E804-4B53-9F2D-913FB8F0ACD8 by XL 130 Homelite, on Flickr
813FBC3C-ED0D-4225-A92F-833FD657A71B by XL 130 Homelite, on Flickr
Good spark, clean looking cylinder and piston but horrible looking inside the carb. Lots of orange looking crud. Carb kit to be installed.
I noticed while reviewing photos the oil tank hoses the I took prior to disassembling everything that it may have been hooked up wrong. Looks like it may have been sucking the oil into the crank case.
Can someone who is familiar with these models review this photo and confirm that the lines were backwards.
D0BEF027-6C79-4168-8B30-0618AE156CB8 by XL 130 Homelite, on Flickr5B1F6D05-E804-4B53-9F2D-913FB8F0ACD8 by XL 130 Homelite, on Flickr813FBC3C-ED0D-4225-A92F-833FD657A71B by XL 130 Homelite, on Flickr
