|
|
410 boot
Dec 18, 2019 19:54:13 GMT -5
via mobile
Post by jerrycmorrow on Dec 18, 2019 19:54:13 GMT -5
Anyone got good directions concerning replacing the boot in my 410? Got the boot and looking to start. Surely cant be as squirrely as the 330 boot. I hope.
|
|
|
|
Post by onlyhomelites on Dec 19, 2019 8:07:52 GMT -5
It's not terrible, but unless you have a set of ~12" Allen wrenches, the throttle handle will be in your way. There's a couple different intake designs behind the carburetor; it might pay off to see which one you have and print the IPL page for reference on the bench. Early 410 IPLLate 410 IPL |
|
|
|
Post by jerrycmorrow on Feb 24, 2020 11:21:34 GMT -5
so, is the UT 10486A model an early or late version?
|
|
|
|
Post by 5terrysupersaws on Feb 24, 2020 16:00:28 GMT -5
*UT:10486-A ( 410-HG ) .. was last built in 1983.
*UT:10486-B ( 410 ) .. was last built in 1992, and is referenced in the later IPL posted above.
|
|
|
|
410 boot
Feb 24, 2020 23:01:51 GMT -5
via mobile
Post by jerrycmorrow on Feb 24, 2020 23:01:51 GMT -5
So, based on what you said and to be specific I'm guessing the ut:10486-A is the early version. Eh?
|
|
