|
Post by Jarhead ☠ on Sept 9, 2019 13:31:53 GMT -5
So I finally got my sandblaster up and running and I'm about to start painting! I'm going to first cut my teeth on a Clinton Super D65. I guess my only question is the proper paints needed to match my HOMELITE saws. I hope I don't run into any issues but you guys are all here to lend me assistance.
Al D.
|
|
|
Post by rowdy235 on Sept 9, 2019 20:46:25 GMT -5
|
|
|
Post by ronaldt on Sept 10, 2019 10:11:46 GMT -5
Clinton's used several different colors. I assume yours is yellow? Make sure you try to match the color on the underside of the parts as that is truer due to less sun fade.
|
|
|
Post by sweepleader on Sept 10, 2019 20:27:18 GMT -5
If you paint that brand C red and green, you can talk about it here I suppose. :{)
It really should be in Off Topic.
|
|
|
Post by Jarhead ☠ on Sept 10, 2019 20:31:21 GMT -5
Wasn't talking about the C brand as the saw, only that I'm going to use it as my first attempt before I paint my HOMELITES! (Better?)🥺 This is red and green.😉
|
|
|
Post by Jarhead ☠ on Sept 20, 2019 22:42:35 GMT -5
|
|