|
Post by Jarhead ☠ on Aug 31, 2019 9:45:42 GMT -5
So all the hard metal parts are in the dishwasher w/ a touch of dawn and vinegar. I soaked them in hot water to help ease the old junk off first. I ordered a 2 pack of intake boots and 2 Walbro WT carb kits for the 2 saws. My only issue is with the recoil starters, they seem to bind up or not engage w/ the flywheel when it sits upright have to tilt saw to the right. I did notice that the black piece was sorta hanging up a bit so I oiled it but still sticks.
|
|
|
Post by edju1958 on Aug 31, 2019 10:32:46 GMT -5
After I put mine together yesterday & tried to start it the recoil locked up.I took it off & sawe that it has the same starter style as the Pioneer saws did.There's a wire that must clip into the plastic housing.This keeps the yoke portion locked into place & as you pull the recoil slowly you'll see it move upward on the worm gear pulley.That might be all it needs. Ed
|
|
|
Post by Jarhead ☠ on Aug 31, 2019 10:44:21 GMT -5
Do you have a picture of the part? Both of the recoils don't appear to have any extra parts.
|
|
|
Post by edju1958 on Sept 1, 2019 8:27:09 GMT -5
Do you have a picture of the part? Both of the recoils don't appear to have any extra parts. This is what the recoil should look like.
As you can see at the 3 o'clock position there's a "wire" that snaps into a notch in the recoil housing.As you pull the recoil rope the wire holds the yoke in place & the part (I don't know the name of it) travels up the spiral shaft.This "part" then engages the flywheel to turn the engine over.When I took my recoil off for the pic I noticed it didn't stay in place in that groove to the right.
Ed
|
|
|
Post by Jarhead ☠ on Sept 1, 2019 8:57:08 GMT -5
Neither of the recoils I have have the wire piece so I guess I'll have to find 2 of design something.
|
|
|
Post by edju1958 on Sept 1, 2019 10:27:32 GMT -5
You won't be able to make them because they're like a spring.You need part # 94505A.Leon has 2 in stock at $3.99 ea. Ed
|
|
|
Post by Jarhead ☠ on Sept 1, 2019 10:59:36 GMT -5
I was able to find 2 off feebay prior to seeing this post.
|
|