|
Excess gas
May 12, 2019 12:53:24 GMT -5
via mobile
Post by arkmike on May 12, 2019 12:53:24 GMT -5
While trying to adjust the carburetor it blows gas back out the intake hole it will idle and can reach a high rpm but from low idle it dies as soon as I pull the throttle
|
|
|
Post by rowdy235 on May 12, 2019 13:00:28 GMT -5
You don't mention the model of the saw but usually gas "spraying" back out of the intake is indicative of reed valve problems. I would give the reed valve a thorough inspection.
|
|