|
Post by jbowski on Mar 3, 2019 13:39:45 GMT -5
I thought the hole was wallored out or stripped but looking at the manual it looks like a nut is supposed to be inside the handle tha the screw bolts the handle brace to the handle, is there a trick to putting the nut inside, other than driving all the pins out from one side? thanks
|
|
|
Post by onlyhomelites on Mar 3, 2019 15:41:56 GMT -5
The nut slips in from the bottom and the rubber handle grip should hold it in place. As far as I can remember the pins are just for the trigger, throttle lock and safety trigger to pivot on.
|
|
|
Post by jbowski on Mar 3, 2019 17:22:11 GMT -5
i see the slot for the nut, thanks
|
|