|
|
Post by dangercat on Mar 23, 2019 16:38:54 GMT -5
Still having a hard time finding the correct drum for the 750, I have tried an oregon 14026, a Total n135-a8, and a herr n134-a7 to no avail. The oregon was way too big even with the spacer and needle cage, as were the Herr n134. The Total n135 was too small to fit with the sleeve and too loose on the mounting bars without it. I bought a Oregon 3/8 8 tooth sprocket but the original drum has been mishapen a bit and dosent fit properly. Looking for the correct drum!
|
|
|
|
Post by undee70ss on Mar 23, 2019 18:28:28 GMT -5
What size chain are you planning on using? 404 or 3/8?
|
|
|
|
Post by undee70ss on Mar 23, 2019 18:52:36 GMT -5
Still having a hard time finding the correct drum for the 750, I have tried an oregon 14026, a Total n135-a8, and a herr n134-a7 to no avail. The oregon was way too big even with the spacer and needle cage, as were the Herr n134. The Total n135 was too small to fit with the sleeve and too loose on the mounting bars without it. I bought a Oregon 3/8 8 tooth sprocket but the original drum has been mishapen a bit and dosent fit properly. Looking for the correct drum! Also, do you have the 750 parts lists? |
|
|
|
Post by dangercat on Mar 23, 2019 19:08:35 GMT -5
I am planning on using 3/8 .050 gauge chain. I do have a 750 parts list and have searched ebay for drums matching the parts numbers but have turned up nothing. Which is why I have been looking for alternatives.
|
|
|
|
Post by undee70ss on Mar 23, 2019 19:14:39 GMT -5
|
|
|
|
Post by dangercat on Mar 23, 2019 19:23:57 GMT -5
I don't mind using a spur drive, the description the seller has says it is for a 404 pitch. The main reason I am looking for 3/8 050 gauge is because I have a 36" Windsor bar that fits and would look good restored with the Homelite stars decal set. Is there a reference for what part numbers fit that isn't in the IPL? I do really appreciate the help, y'all been going the extra mile pointing me to auctions and such!
|
|
|
|
Post by undee70ss on Mar 23, 2019 19:29:31 GMT -5
All 3 IPL’s show 12819 as s 3/8 spur sprocket  |
|
|
|
Post by dangercat on Mar 23, 2019 19:36:27 GMT -5
I'll be damned you are right, never noticed that on the IPL, about to put my order in! I appreciate the help, cant be too much fun helpin out a newby with these saws.
|
|
