|
Post by stillsawing on Dec 6, 2018 13:02:37 GMT -5
Trying to change out a broken handle on my super 1050, all of the IPL's show a A-63665. The reality is that requires a 58179C, this has a smaller bolt spacing and inlet. The 58179 was used for the early C series. Was a service bulletin issued with regards to the use of the Walbro SDC74 versus the Tillotson? I made a purchase for a A63665 from I believe to be a reputable seller and I have what appears to be the right part, however it's not. Hope to be able to return it. It's marked as 64944A, somewhat close, but no cigar. Will have a couple of pics to show the difference.
|
|
|
Post by stillsawing on Dec 6, 2018 13:50:52 GMT -5
The dirty one is the newly purchased. [attachment id="2145"
|
|
|
Post by undee70ss on Dec 6, 2018 15:30:02 GMT -5
Which parts list are you looking at. The latest one shows the SDC74. I believe your handle is for the bigger saws.
|
|
|
Post by blythkd on Dec 7, 2018 0:13:57 GMT -5
Saw a couple of blue ones like yours on Ebay for about $26 each. They're off of C Series saws.
|
|
|
Post by sawnami on Dec 10, 2018 9:48:33 GMT -5
This what I show for a A-63665.
|
|
|
Post by stillsawing on Dec 10, 2018 20:36:50 GMT -5
I knew that I could rely on you masters of the craft. Undee, you are correct knowing that the part belongs with the larger group of saws. Looking at the IPL for the 2100S, the part I purchased is a A-65750-A, not the A-63665 that I need. Thank you Sawnami for keeping me on the right track. I will PM you, Undee.
|
|
|
Post by nategoodwrench on Jul 13, 2020 14:35:27 GMT -5
I knew that I could rely on you masters of the craft. Undee, you are correct knowing that the part belongs with the larger group of saws. Looking at the IPL for the 2100S, the part I purchased is a A-65750-A, not the A-63665 that I need. Thank you Sawnami for keeping me on the right track. I will PM you, Undee. If you still have the A-65750-A. I would be interested it. I am currently in the process of sprucing up a 2100s. Thanks
|
|
|
Post by lesorubcheek on Jul 13, 2020 16:08:15 GMT -5
Yea, the little nib is the giveaway for 2000/2100/3100 handles. The reed cage aligns in it. Dan
|
|