|
|
Post by 5terrysupersaws on Oct 23, 2018 14:14:35 GMT -5
The duckbill check valve in the oil tank is most likely causing the problem.
Refer to the Homelite XL Throttle Interlock Chainsaw IPL 17118 Rev.4 , for your saw.
|
|
adgno
Saw Builder
Posts: 122
|
Post by adgno on Oct 23, 2018 14:59:09 GMT -5
I had noticed the chain in the first images and took notice it's got serious anti-kickback features. Looking at it again, I'm wondering if it's 1/4" pitch instead of the normal 3/8"LP? If you look at the drive sprocket, it will have 9 spurs instead of the usual 6 for 3/8"LP. I checked this and it has 6 spurs so it is a 3/8" then? |
|
|
|
Post by undee70ss on Oct 23, 2018 17:12:18 GMT -5
I had noticed the chain in the first images and took notice it's got serious anti-kickback features. Looking at it again, I'm wondering if it's 1/4" pitch instead of the normal 3/8"LP? If you look at the drive sprocket, it will have 9 spurs instead of the usual 6 for 3/8"LP. I checked this and it has 6 spurs so it is a 3/8" then? Yes. 3/8 lo pro. |
|
|
|
Post by rowdy235 on Oct 23, 2018 19:06:50 GMT -5
I just noticed on the pictures, that is a very anti-kickback chain! Don't know if I've ever seen one quite like that. I run Oregon Vanguard on one of my Super 2's I use for limbing and its not anywhere near like that
|
|
|
|
Post by undee70ss on Oct 24, 2018 3:20:39 GMT -5
That is old Oregon Extraguard chain. Has really massive rakers.  |
|
