|
Post by msellers on Oct 7, 2018 18:40:49 GMT -5
I am looking for a piston and cylinder with rings to get going on a rebuild. I am sure that it will need more, but I can start with that for now. Hopefully we can help each other out.
Mike
|
|
|
Post by canadian270 on Nov 11, 2018 19:15:35 GMT -5
I am looking for a piston and cylinder with rings to get going on a rebuild. I am sure that it will need more, but I can start with that for now. Hopefully we can help each other out. Mike mike does this saw look similar to an xl12 only bigger piston and cylinder?if so I might be able to help.
|
|
|
Post by msellers on Nov 11, 2018 19:19:32 GMT -5
I am looking for a piston and cylinder with rings to get going on a rebuild. I am sure that it will need more, but I can start with that for now. Hopefully we can help each other out. Mike mike does this saw look similar to an xl12 only bigger piston and cylinder?if so I might be able to help. Yeah, it does. Will get numbers off of it again. Need to update post with them. Can't find my notes at present.
|
|
|
Post by canadian270 on Nov 11, 2018 19:25:32 GMT -5
I have an xl automatic with a chain break .it has 135 of compression.made by terrynice saw.
|
|
|
Post by canadian270 on Nov 11, 2018 19:36:07 GMT -5
it has a mechanical chain break.works quite well. the oil tank for the cutter bar is on top of the saw by the bar and chain .its a good saw. Gerry.
|
|
|
Post by canadian270 on Nov 11, 2018 21:31:44 GMT -5
gerrymarks1959@hotmail.com my eddy ill try the same.
|
|
|
Post by 5terrysupersaws on Nov 11, 2018 21:42:28 GMT -5
I have an xl automatic with a chain break .it has 135 of compression.made by terrynice saw. Does the XL-Automatic/SL have an ID tag? I'm curious if the UT and Serial number is one that's not on the Terry UT List.
|
|
|
Post by canadian270 on Nov 11, 2018 21:50:51 GMT -5
I have an xl automatic with a chain break .it has 135 of compression.made by terrynice saw. Does the XL-Automatic/SL have an ID tag? I'm curious if the UT and Serial number is one that's not on the Terry UT List. ill get the info of the tag :UT #10495 SERIAL#T78 00258
|
|
|
Post by canadian270 on Nov 11, 2018 22:22:24 GMT -5
mike dont think I got your e-mail bro.
|
|
|
Post by 5terrysupersaws on Nov 11, 2018 22:25:10 GMT -5
Does the XL-Automatic/SL have an ID tag? I'm curious if the UT and Serial number is one that's not on the Terry UT List. ill get the info of the tag :UT #10495 SERIAL#T78 00258 That's a special +UT:10495 ( XL-Auto/SL ) SN:T78 00258 .. because it's not on the last year built lists.
I will add it to the Homelite-Terry UT List.
Merci beaucoup mon ami ! (Thank you very much my friend !)
|
|
|
Post by canadian270 on Nov 11, 2018 22:29:50 GMT -5
gees I don't understand what is so special about it?
|
|
|
Post by canadian270 on Nov 11, 2018 22:33:33 GMT -5
mike if you are interested ill do a swap for the skil saw? try and get those pic out tomorrow I need your email address.?
|
|
|
Post by 5terrysupersaws on Nov 11, 2018 23:09:12 GMT -5
gees I don't understand what is so special about it? The last year built UT Lists are incomplete for the Terry built saws and until now, +UT:10495 was an unknown model.
That is what makes it special, also it's a 40 year old chainsaw with a chain brake.
I've been searching for such UT numbers to complete the list.
|
|
|
Post by canadian270 on Nov 11, 2018 23:18:10 GMT -5
Im happy it was good info for you.regards gerry. the saw works quite good.
|
|
|
Post by canadian270 on Nov 12, 2018 9:55:46 GMT -5
ill get the info of the tag :UT #10495 SERIAL#T78 00258 That's a special +UT:10495 ( XL-Auto/SL ) SN:T78 00258 .. because it's not on the last year built lists.
I will add it to the Homelite-Terry UT List.
Merci beaucoup mon ami ! (Thank you very much my friend !) does this ad more value to the saw ? not that I'm looking for anything extra.just wondering that's all.by the way I speak newfi not French bro .lol.from Canada s east coast.its pretty close to heaven as you are going to get lol. good old Newfoundland.
|
|
|
Post by undee70ss on Nov 12, 2018 11:20:59 GMT -5
]does this ad more value to the saw ? not that I'm looking for anything extra.just wondering that's all.by the way I speak newfi not French bro .lol.from Canada s east coast.its pretty close to heaven as you are going to get lol. good old Newfoundland. Here in the USA, yes. Chain break saws from that era are rare here.
|
|
|
Post by canadian270 on Nov 12, 2018 11:36:44 GMT -5
]does this ad more value to the saw ? not that I'm looking for anything extra.just wondering that's all.by the way I speak newfi not French bro .lol.from Canada s east coast.its pretty close to heaven as you are going to get lol. good old Newfoundland. Here in the USA, yes. Chain break saws from that era are rare here. msellers I think will be happy with this deal.
|
|
|
Post by canadian270 on Nov 12, 2018 11:43:24 GMT -5
]does this ad more value to the saw ? not that I'm looking for anything extra.just wondering that's all.by the way I speak newfi not French bro .lol.from Canada s east coast.its pretty close to heaven as you are going to get lol. good old Newfoundland. Here in the USA, yes. Chain break saws from that era are rare here. you guy did not have safety features back then? I remember when these features came about .must be getting old ,lol. same store here also sold a few Canadian pm saws and few pioneers saws whitch had IEL markings along with pioneer these were excellent saws.bit heavy but hell of a saws.when I was a kid I remember the store owner giving me a few parts to fix up a old homelite zip I managed to kobble together from a pile of parts. I was 14 years old at the time. wish I had a an old Homeilite Zip now . brings back a lot of good memories now.might add the store sold off all its saws for good prices to make way for saws with safety features.
|
|
|
Post by 5terrysupersaws on Nov 12, 2018 16:44:35 GMT -5
That's a special +UT:10495 ( XL-Auto/SL ) SN:T78 00258 .. because it's not on the last year built lists.
I will add it to the Homelite-Terry UT List.
Merci beaucoup mon ami ! (Thank you very much my friend !) does this ad more value to the saw ? not that I'm looking for anything extra.just wondering that's all.by the way I speak newfi not French bro .lol.from Canada s east coast.its pretty close to heaven as you are going to get lol. good old Newfoundland. Value depends on condition and rarity, Terry saw enthusiasts may show more interest. My apologies Gerry, I somehow mixed you up with a member from Quebec. Greetings from sunny Alberta.
|
|
|
Post by canadian270 on Nov 12, 2018 17:00:23 GMT -5
ok bro.
|
|