Post by jklw77 on Mar 31, 2018 20:34:04 GMT -5
Saw a few of your videos speaking of oil/gas ratios,( always a good subject ) had a blue XL12 freeze up with carbon, was able to rebuild with just a handful of parts(got lucky).
Was finally able to get some amsoil 2 stroke oil,SABER, mixed with no alcohol 89 octane fuel 80:1mix, my XL12 really liked it seemed like it picked up a few rpms over higher oil mix ratios
idled really well, one pull starts ...will see how it does over the long haul when saw goes to working. Thanks for the recommendation. jklw77
Was finally able to get some amsoil 2 stroke oil,SABER, mixed with no alcohol 89 octane fuel 80:1mix, my XL12 really liked it seemed like it picked up a few rpms over higher oil mix ratios
idled really well, one pull starts ...will see how it does over the long haul when saw goes to working. Thanks for the recommendation. jklw77
