Post by sweepleader on Dec 17, 2017 9:09:42 GMT -5
I have a tester that is a spark plug with the side electrode removed and an alligater clip welded to the side of the shell. It does not work well with the short plug lead of a saw so I soldered a short length of wire between another clip and a bigger battery charger clip. The larger clip grabs the plug and of course you ground the smaller one. It works on just about anything and uses the original plug or the plug with no side electrode. Leaves both hands free to hold the saw and pull the rope.
XL-500 (One owner, me), Another XL-500 XL-15, Big Red, John Deere 350CS(Yellow SXLAO) Old Blue (SXLAO) XL-BC4 Brush Cutter, Little Red, XL2, XLA115/1/400-1P (115VAC, Single Phase, 400Hz, 125Watts) XL-98 Multi Purpose Saw 1969 T50 Chev Fire Truck 1962 K10 Chev Pickup 400SBC TH400 1981 C10 Chev Pickup 250-6 4spd