Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 31, 2017 17:09:35 GMT -5
Can’t seem to get my C-72 to fire. I have read several posts on testing the ignition system which I have and I do come up with a problem I just don’t know which component is causing it. One post explained testing from the points to where the coil connects to the point box with the switch in the on and then off position and it should have gone from 2 ohms to 0. Mine pretty much stayed at 2 then dropped to maybe 1.5 but never zero. I also read a post where it was common to find the points grounded all the time and they shouldn’t be according to that post but now I can’t find it. (May not have been on HOH). Anyway if anyone knows anything else I can check to pin point the problem or to make sure the points aren’t grounded when they shouldn’t be I am open to all the help I can get lol.
|
|
|
Post by onlyhomelites on Oct 31, 2017 17:28:56 GMT -5
|
|