Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 11, 2017 21:37:09 GMT -5
Homelite offered four different handles on the 2000, just wondering if one was the same as the C-72 or other large C series
|
|
|
|
Post by onlyhomelites on Sept 11, 2017 21:53:25 GMT -5
The A-58398-A full wrap is listed in the IPL's as fitting both saws, so the A-69174 flush cut with the vinyl grip would fit as well. The crankcase & tanks are the basically the same, so the handles should be interchangeable.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 17, 2017 6:44:30 GMT -5
The A-58398-A full wrap is listed in the IPL's as fitting both saws, so the A-69174 flush cut with the vinyl grip would fit as well. The crankcase & tanks are the basically the same, so the handles should be interchangeable. The handle was right at 32.00 shipped so I figured I couldn't go wrong. Thanks |
|
