|
|
Post by boeingfixer on Nov 27, 2016 6:51:22 GMT -5
I picked up a homelite 330 on the weekend for 40 bucks. Gentlemen was the original owner and said that the saw has only cut about 10 cords. It's in beautiful shape, it doesnt run at the moment, I've taken the carb off and am going to give it a rebuild kit and also replace the infamous rubber intake boot under it. Does anyone know where I can get the following parts shipped to canada;
rebuild kit for zama c1s-h3
intake boot
air filter gasket
Thanks for your help, I'll post some pictures of the process.
|
|
|
|
Post by boeingfixer on Nov 27, 2016 6:59:56 GMT -5
|
|
|
|
Post by boeingfixer on Nov 27, 2016 12:53:37 GMT -5
Hey does anybody know what this little valve is? Seems like a fuel shutoff?  |
|
|
|
Post by undee70ss on Nov 27, 2016 17:39:07 GMT -5
I picked up a homelite 330 on the weekend for 40 bucks. Gentlemen was the original owner and said that the saw has only cut about 10 cords. It's in beautiful shape, it doesnt run at the moment, I've taken the carb off and am going to give it a rebuild kit and also replace the infamous rubber intake boot under it. Does anyone know where I can get the following parts shipped to canada; rebuild kit for zama c1s-h3 intake boot air filter gasket Thanks for your help, I'll post some pictures of the process. PM Chainsawlady ( a member here) for parts. You can also check here www.leonschainsawpartsandrepair.com/store/c1/Featured_Products.html |
|
|
|
Post by undee70ss on Nov 27, 2016 17:40:17 GMT -5
View AttachmentHey does anybody know what this little valve is? Seems like a fuel shutoff? What the socket is pointing to? That is just a grommet. |
|
|
|
Post by boeingfixer on Nov 27, 2016 18:16:04 GMT -5
No sorry, not the grommet, theres a little black valve with two fuel lines attached to it, and when I unscrew it all the way it's a tapered black cone. I believe that it may be part of the 330 "winter" kit, but I'm not sure what it's purpose is.
Justin
|
|
|
|
Post by undee70ss on Nov 27, 2016 19:10:10 GMT -5
No sorry, not the grommet, theres a little black valve with two fuel lines attached to it, and when I unscrew it all the way it's a tapered black cone. I believe that it may be part of the 330 "winter" kit, but I'm not sure what it's purpose is. Justin Most likely the duckbill check valve. houseofhomelite.proboards.com/thread/5140/larger-duck-bill-valve-96841 |
|
|
|
Post by boeingfixer on Nov 27, 2016 19:27:05 GMT -5
I appreciate your reply, it's not the duckbill check valve, I think it's item A-96827 in the homelite 330 winter unit ipl. I believe it may be part of the fuel heat system. If anyone could elaborate on this little check valve I'd love to know more about it. I'll take a better picture tomorrow
|
|
|
|
Post by undee70ss on Nov 28, 2016 19:51:05 GMT -5
I appreciate your reply, it's not the duckbill check valve, I think it's item A-96827 in the homelite 330 winter unit ipl. I believe it may be part of the fuel heat system. If anyone could elaborate on this little check valve I'd love to know more about it. I'll take a better picture tomorrow To be honest, I really don't know the purpose of the valve, never had any experience with a 330 winter saw. |
|
