pastawon
Dumpster Diver
SERIOUS COLLECTOR
Posts: 26
|
Post by pastawon on Jan 12, 2013 3:48:16 GMT -5
I now have a limited number of new (NIB) drive belts available (Homelite part number 71270) that fit the 20 MCS and 26 LCS saws. These belts are of very high quality and are Made in USA, not China. The price is $25.00 ea. plus shipping. Satisfaction is guaranteed or purchase price will be refunded if returned within 10 days. To respond to this offer contact me by E-mail: PastaMatic@aol.com or by phone: (516) 445-6062
|
|
|
Post by priceandy70 on Jan 15, 2013 17:31:21 GMT -5
What are your thoughts on it fitting a 7-29?
|
|
|
Post by schudairy721 on Jan 15, 2013 22:42:47 GMT -5
What are your thoughts on it fitting a 7-29? They will fit just narrower. Not sure if they would track in the center
|
|
pastawon
Dumpster Diver
SERIOUS COLLECTOR
Posts: 26
|
Post by pastawon on Jan 17, 2013 3:04:56 GMT -5
There were 3 different drive belts used on the belt drive saws: The 20 MCS and the 26 LCS shared the same belt (71270). The drive belt used on the 5-30 and the 7-29 (73216) was the same length only 1/8 inch wider. The 5-30N and the 8-29 shared the same belt(77283) which was also wider. I will be getting both of these wider belts in this spring and will let you know when they are available. Thanks for your interest.
|
|
|
Post by priceandy70 on Jan 24, 2013 17:26:38 GMT -5
That is great news! I also was afraid they would not track properly and ruin. Look forward to getting some belts. Thank you
|
|
|
Post by superstevek1 on Apr 19, 2013 9:39:42 GMT -5
OK great I will be in touch for some belts - thanks Steve
|
|
|
Post by smptrmrk on Oct 21, 2014 20:19:15 GMT -5
Still have any belts
|
|
pastawon
Dumpster Diver
SERIOUS COLLECTOR
Posts: 26
|
Post by pastawon on May 3, 2016 22:40:27 GMT -5
As you can see, the posting for the drive belts was made over 3 years ago. It has taken me this long to have the necessary molds manufactured. The good news is that high quality belts are now available for the 20MCS, 26LCS,earlier 5-30s (up to Serial No.819682) and the 7-29. Belts for the later 5-30s (after Serial No. 819682), 5-30N and 8-29 will be arriving soon. To place an order, I can be contacted by E-mail at PastaMatic@aol.com or on my cell phone (516) 445-6062. Thank you for your patience and support. When I started this project, I never imagined that it would be this difficult, take so long and be so expensive. Michael (PastaWon)
|
|
|
Post by 99tahoe on Jan 10, 2022 17:43:57 GMT -5
hello do you still have the belts for the 26lcs thanks
|
|
|
Post by undee70ss on Jan 10, 2022 17:46:09 GMT -5
hello do you still have the belts for the 26lcs thanks He hasn't been online since 2018.
|
|
|
Post by xl130 on Jan 11, 2022 13:54:07 GMT -5
You could always just try the email….,you never know right?
|
|