|
|
Post by lawnmowertech37 on Nov 16, 2010 20:59:23 GMT -5
Hey there I need some stuff for a 410 I just picked up #93327 Boot #93372 Choke leaver #65084 Oil pump button #97634 Gasket filter and support (2 needed in total don't know if two in pack or just one) Thank you will let you know it may take awhile to see if i have anything |
|
|
|
Post by rcaholic on Nov 29, 2010 4:06:43 GMT -5
Hey there I need some stuff for a 410 I just picked up
#93327 Boot
#93372 Choke leaver
#65084 Oil pump button
#97634 Gasket filter and support (2 needed in total don't know if two in pack or just one)
Thank you
Hello again.
Picked up everything else but still need
#97634 Gasket filter and support (2 needed in total don't know if two in pack or just one)
#A-93494-2 Cover drivecase
If you happen to have a chance to look no rush.
Thank you.
|
|
|
|
Post by badguy on Nov 30, 2010 19:43:59 GMT -5
I'm not sure if this is a part that's available, but I need the little plastic connector that mates the fuel line with the nipple on the bottom of a Tillotson carb on a 1979 150 Auto. Here's a picture of what I'm talking about:  I could also use a new fuel cap if you've got it. Sorry I don't have part numbers...where could I look those up? |
|
|
|
Post by lawnmowertech37 on Dec 3, 2010 18:44:05 GMT -5
I'm not sure if this is a part that's available, but I need the little plastic connector that mates the fuel line with the nipple on the bottom of a Tillotson carb on a 1979 150 Auto. Here's a picture of what I'm talking about: I could also use a new fuel cap if you've got it. Sorry I don't have part numbers...where could I look those up? Will look this up for you probily monday |
|
|
|
Post by badguy on Dec 5, 2010 21:56:59 GMT -5
Thanks. I tried patching it by twisting some safety wire around it and then sticking some silicone gasket maker over it, but that didn't hold. Can't say I was surprised.
|
|
|
|
Post by seawarzone on May 8, 2011 14:55:16 GMT -5
I'm looking for a carburetor for a Homelite Super XL 925.
Thanks
Ramiro
|
|
|
|
Post by tribulation138 on May 8, 2011 19:33:26 GMT -5
|
|
|
|
Post by dsell on Dec 3, 2011 7:13:44 GMT -5
Need a top handle cover for an XL 69872-A
|
|
|
|
Post by lawnmowertech37 on Dec 8, 2011 21:01:23 GMT -5
Need a top handle cover for an XL 69872-A I may have this used if that is ok ? |
|
|
|
Post by tattooedwelder on Jan 4, 2012 8:54:02 GMT -5
I have a super ez automatic I need a clutch spark plug and a carb rebuild kit. Are these things you have?
|
|
|
|
Post by tattooedwelder on Jan 4, 2012 8:54:51 GMT -5
Ut# 104033
|
|
|
|
Post by illumastorm on Jan 11, 2012 18:02:36 GMT -5
i have a homelite UT10910. and i need a drive sprocket/drum, 18" bar and chain. got any of those?
|
|
|
|
Post by cblackky on Jan 12, 2012 3:02:46 GMT -5
ineed jug +piston for a homelite 750or maybe just jug ....adn all the best for 2012
|
|
|
|
Post by lawnmowertech37 on Feb 23, 2012 18:40:12 GMT -5
cblackky i at this time do not have this item i need to check my sources
|
|
|
|
Post by iceman on Feb 23, 2012 23:42:12 GMT -5
I'M looking for compression relief valve part# A-12712 and a Piston part# A-70572-A they are for a homelite 750
|
|
|
|
Post by lawnmowertech37 on Feb 24, 2012 12:42:39 GMT -5
i need to check will get back later
|
|
|
|
Post by jdinva on Mar 4, 2012 0:49:51 GMT -5
hello. I am in need of the following: Cylinder, piston( with wristpin and clips), and rings for a c-5/c-51.
Sorry, i do not have part numbers for these. Just let me know, price, with shipping to 23803, and availiability. Thanks
|
|
|
|
Post by kennwood on Mar 18, 2012 2:14:52 GMT -5
Hi Calvin I'm looking for an ignition module part number A48507 for a DM 40 UT-05027 demo saw I hope you can help Thanks. Ken
|
|
|
|
Post by cblackky on Mar 19, 2012 6:11:29 GMT -5
hi i need a piston kit for xl 12 44.4 dia
|
|
|
|
Post by 426crown on Jun 6, 2012 21:53:03 GMT -5
Hi--Anyone needing parts for super XLAO--PM i've got plenty
of everything--Bill
|
|
