|
Post by mikem on Apr 24, 2009 13:44:35 GMT -5
Can someone that has done the 330 muffler mod(tutorials) advise me if the carb requires re-jetting(bigger) or just re-adjusted to compensate for better air/exhaust flow ?
I was thinking about this as an interim "fix" until the brown truck gets here with the SEZ... ;D
|
|
|
Post by RBW on Apr 24, 2009 14:04:48 GMT -5
The only thing you should need to do is readjust the H needle for a good top end. Be sure not to go too lean and you want to run at least a 40:1 ratio if not 32:1.
.
|
|
|
Post by mikem on Apr 24, 2009 15:15:33 GMT -5
The only thing you should need to do is readjust the H needle for a good top end. Be sure not to go too lean and you want to run at least a 40:1 ratio if not 32:1. . Thanks RBW...That will help
|
|