|
Post by ivy079 on May 16, 2022 21:00:24 GMT -5
Hey Everyone, New member here looking for some parts for a C-7 I just picked up at an auction. I am in search of the whole ignition system or just a new coil. It looks like someone working on it before I got it put a puller bolt into the coil and condenser. I have looked through ebay and some other online resources and haven't been able to find anything.
|
|
|
Post by onlyhomelites on May 18, 2022 7:46:10 GMT -5
Ouch! Those systems and components are not the easiest to find these days. You'll have to keep an eye on Ebay; a seller that goes by "customchainsawparts" tends to put 3 to 4 up at one time as he parts a group of saws out, but they go quick.
For grins, it might be worth cleaning up the coil and patching that area with some non-metallic epoxy or fiberglass. Good odds if it wasn't bad, it'll still work!
|
|
|
Post by edju1958 on May 18, 2022 8:06:37 GMT -5
'Lil Red Barn sells the condenser & points as a set on eBay.They used to sell the coils as well (if Leon's suggestion doesn't work out).
|
|
|
Post by ivy079 on May 19, 2022 17:43:52 GMT -5
Ouch! Those systems and components are not the easiest to find these days. You'll have to keep an eye on Ebay; a seller that goes by "customchainsawparts" tends to put 3 to 4 up at one time as he parts a group of saws out, but they go quick. For grins, it might be worth cleaning up the coil and patching that area with some non-metallic epoxy or fiberglass. Good odds if it wasn't bad, it'll still work! Thanks Leon I'll keep an eye out and will give your suggestion a try. Hopefully it still has some life left!
|
|
|
Post by ivy079 on May 19, 2022 17:45:06 GMT -5
'Lil Red Barn sells the condenser & points as a set on eBay.They used to sell the coils as well (if Leon's suggestion doesn't work out).
Thanks Ed. I'll take a look if I can't get it going again!
|
|
|
Post by rarefish383 on Jun 2, 2022 22:06:32 GMT -5
Do all of the C series have the same coil? They are pretty common around here. I got my C51 and C72 for $5 each, and my cousing got a C5 and a 330 for $1. I gave the C5, running, to a friend, to use as a milling saw, and he rebuilt the 330 for me.
|
|
|
Post by edju1958 on Jun 3, 2022 9:02:03 GMT -5
Joe,as far as I know they do,with the possible exception of the C91.Just look at the IPLs for the C series & see if they all take the same part # for the coil.
|
|