mikew
Collector wannabe
Posts: 11
|
Post by mikew on Mar 5, 2022 16:46:19 GMT -5
Hey.... I got my 52 running today. It has a whittled down twig attached to the manual oiler button with a piece of wire, it works just fine but does get in the way just dangling there now and again. The plastic bushing is still in the handle but are the parts available.
The IPL I have isn't clear enough to pick specific parts out for the button assembly.
any help would be much appreciated.
Mike
|
|
|
|
Post by edju1958 on Mar 5, 2022 18:44:01 GMT -5
Any of the C series throttle lock pins with the spring & E clip will work.The XL-12 & SXL use the same part #s too.As long as the hole is there the throttle lock can be added on.I can't imagine trying to start one of those saws without one.The throttle lock pin is part # 58404,spring is part # 58405,& the retaining ring is part # 58409.
|
|
|
|
Post by ronaldt on Mar 5, 2022 19:39:04 GMT -5
You could probably find a whole parts saw and take what you need. C series, and xl-12s / super xlao are very common.
|
|
mikew
Collector wannabe
Posts: 11
|
Post by mikew on Mar 6, 2022 14:22:00 GMT -5
Thought I'd try to make one... actually a few fore I got this close... It works for now at least. Haa  |
|
