|
Post by kmswr on Jan 7, 2022 10:25:47 GMT -5
Im working on this for a friend,, it has broken,disconnected primer in fuel cap,does that affect oiler ? I dont care much about the primer, it seems to start ok just a few extra pulls.oil line duckbill is intact in oil tank,cap gasket looks ok,lines clear to and from adjuster to bar pad,,can I run off clutch with a cordless drill and see if oil pump (in carb) works ? if no output what are the chances I could find parts for the carb/oil pump ?
|
|
|
Post by undee70ss on Jan 7, 2022 11:47:12 GMT -5
|
|
|
Post by kmswr on Jan 7, 2022 13:49:45 GMT -5
Thanks for the quick reply,Ill try that or just splice them together.
|
|
|
Post by kmswr on Jan 11, 2022 9:04:09 GMT -5
lines looked to be in proper position,,still no output,, is there a pressure (psi) that should be coming out of the carb fitting.,this has the fitting on the carb not oil pump or crankcase.,I've been running the saw with a drill chucked onto the clutch nut and no spark plug .
|
|
|
Post by kmswr on Jan 12, 2022 10:21:39 GMT -5
The duckbill and oil cap gasket look ok but maybe I'll replace them and the zama C1Q carb diaphragm while I've got it apart, wheres the best place to get these parts ?
|
|